Plumbing How to Install a Toilet
If you’ve ever wondered how to install a toilet, this article will give you the inside scoop on the process. Here are some of the key tools you will need and tips for success. Follow these steps to install a toilet. You may find it easier to install a toilet yourself if you have a plumbing background. Before beginning, you should have the correct tools and supplies on hand. The first step in installing a toilet is to make sure the pipe you’re using fits into the tank. To install a new toilet, you’ll need to remove the old one. Use channel-type pliers to loosen the bolts on the bottom of the tank. If the nuts are rusted or hard to remove, you can use penetrating oil to help loosen them. You’ll also need to remove the old toilet’s seal and the bolt cover. Once you’ve removed the old tank, you’ll need to remove the toilet’s bolts and bowl. Next, remove the old toilet’s bolts and nuts. The flange connects the waxe ring to the sewer pipe. If the flange has rot, it won’t hold the screws. In such a case, use an ear-type repair ring to drive the screws into firm wood far away from the flange. Depending on the extent of the rot, you may have to cut off the ear so the new screw can fit correctly. After leveling the floor, it’s time to remove the old tank and replace it with the new one. It’s best to have two people doing this, as it can be very tricky to lift both pieces together. The plumber will also remove the old tank’s bolt caps, which you can open with a screwdriver. Next, install the new toilet. Make sure the bolt caps are securely screwed in. The next step in plumbing how to install a toilet is to attach the tank to the bowl. Then, insert the mounting bolts into the holes in the bowl. Finally, attach the tank to the bowl by tightening the bolts. Be careful not to over-tighten the bolts, as it could crack the porcelain bowl. Afterward, test the toilet and flush it six times to ensure there are no leaks. While plumbing how to install a toilet may seem daunting, it’s actually surprisingly easy. If you follow the steps carefully and hire a plumber, it shouldn’t be too difficult. However, if you’ve never done it before, it’s better to leave it to the pros. Remember, if it’s not your cup of tea, it’s best to get a plumber. A plumber will take between two and four hours to install a new toilet. Professional plumbers have access to all the necessary tools and equipment to complete the job correctly and safely. They can also inspect the area for potential hazards. The plumbers can also offer you a warranty for their work. A plumber will be able to check the pipe and make sure that it’s free from leaks. This way, you can rest assured that everything will go as planned. Otherwise, you’ll end up paying more for the repairs later. Click here to learn more about plumbers merchant derby.