How to Cut a Plastic Pipe for Plumbing
If you need to cut a plastic pipe for plumbing, you need to use a cutting tool that has a tapered cone on one end. A sharp construction knife works well for this. A heavy-grade sandpaper also works well to remove burrs. Once you have cut the pipe, you need to use a chamfering tool to smooth out the sharp edges. Lastly, you will need to thread the pipe by hand or with a machine. The first step in cutting the pipe is to mark where you are going to cut the pipe. You should place the pipe section on a stable surface and put on protective gear. Then, slowly rotate the pipe surface with the handsaw. After you are done, deburr the edges to prevent further damage. You should also ensure that the handle is not bent or twisted. The handsaw must be handled carefully and with care. Once you have marked where to cut the pipe, you need to clamp it in place. Make sure to leave enough space between the pipe and the tool. It is important to make sure the pipe isn’t touching the ground during the process. Also, ensure that the blade is sharp and that you are using it at a temperature that is above 50 degrees Fahrenheit. A dull blade can crack the plastic pipe. Lastly, make sure that you have adequate clearance between the pipe and the clamp. If you want to use a saw, you should buy a tool designed for cutting ABS or PVC pipes. ABS pipe is very brittle and standard pipe cutter tools won’t cut it. However, it does cut PVC pipe, but it will leave burrs that can interfere with solvent gluing. This method is also more time-consuming and requires more expertise. When cutting PVC pipe, you should use a saw that has a flat blade. If you want to cut the pipe yourself, you can purchase a ratchet cutter. These tools are available in a wide range of sizes and designs. You should opt for a high-quality tool, as cheap tools can easily break. Choose a tool that can cut PVC pipes between 1.5 and two inches in diameter. Choose one that is comfortable and suitable for your hand size. If the diameter of the pipe is bigger than 2 inches, you can use a rotary style cutter. The jigsaw is a good option for smaller-diameter pipes. These tools are also lightweight, allowing you to work longer. You should also consider purchasing a jigsaw if you don’t have one. A jigsaw will fit most types of pipes, and a hacksaw can cut plastic pipe as well. You can choose between a saw with a metal-cutting blade and a tool with a wood-cutting blade. Click here to learn more about boiler heating engineer derby.