How to Install a PEX Plumbing System
A PEX plumbing system is the newest plumbing trend. It’s relatively new and easier to install than copper supply lines. PEX connections don’t need to be soldered, and they’re easy to build into manifold systems. Despite its ease of installation, PEX doesn’t necessarily make your plumbing system more efficient. PEX works best in home-run layouts, because it’s easy to connect and doesn’t require soldering. how to install pex plumbing system
Once you’ve purchased your PEX pipe, it’s time to connect it. Before you start, you’ll need the right supplies and tools. PEX pipe fittings come in red, blue, and white. Make sure that you select the correct color and type of pipe for your project. You’ll also need crimping tools. PEX pipes can’t be installed in all locations, so it’s important to know which type you’re getting.
Luckily, PEX has several different ways of connecting. One of the easiest is a push-fit connection. Push-fit fittings simply grab the end of the PEX pipe and form a seal. Unlike compression fittings, they don’t require tools. You can also use a paper tube “trap” to mimic a push-fit connection. In case you don’t have one of those, you can always use a cinch clamp to keep the PEX tubing in a tight bend.
Another common method is copper crimping. To use copper crimping, you’ll need copper crimping rings. Simply slide a copper ring over the PEX tube. Insert the PEX fitting into the copper ring. Then, using the PEX crimping tool, crimp the two pieces together. The brass nut seals the fittings once you tighten it.
Another way to install PEX is to use a submanifold system. These systems save water and energy by reducing the amount of pipes needed for the distribution of water. They also save money by avoiding the need for long faucet runs. Using dedicated lines will require a lot of PEX and a lot of holes. Using a submanifold system will allow you to save water and energy in many ways.
One of the benefits of PEX is that it is easier to install than copper or steel. PEX pipes don’t require soldering and are compatible with existing metal supply lines. Unlike copper or steel, they won’t corrode or cause water hammer. PEX is also quieter than copper pipes. However, you should check the plumbing code in your area before deciding to use PEX.
When installing PEX tubing, you should support it every four to six feet with a strap or a clamp. You can also purchase PEX fittings at your local hardware store or home improvement store. PEX is more flexible than copper, which means that the pipe will expand and contract. Make sure to choose fittings made specifically for PEX tubing and copper. These fittings should be easy to find in most home improvement stores.
When you’re deciding to install a PEX plumbing system, make sure you read the instructions carefully and follow them step-by-step. You can save up to 63% in construction costs with a PEX system if you follow these simple steps. You’ll be surprised at how easy it is. So, do yourself a favor and check out a PEX plumbing guide! You’ll be glad you did.
Click here to learn more about boiler repair in derby.